Home > Buy Now > Titanium > Titanium Bars > Titanium Bar

Products

Titanium

Company Profile

Selling Leads

Baoji Fengze Metal Material Co.,Ltd
[China]

Address:
Liangquan Industry, Maying Town ,Baoji City ,China Baoji Shanxii 721013 China

Phone:
86-0917-3565328

Contact name:
DUZHE

Baoji Fengze Metal Material Co.,Ltd

Products

	Titanium Bar

Click to enlarge image

Origin	China
Model Number	45465653
Brand Name	FZF

titanium bar

1.Grade:

Gr1,Gr2,Gr3,Gr4,Gr5,Ti6Al4V ELI,Gr7,Gr9,Gr11,Gr12, Gr23,Ti6Al7Nb,

Ti15333

2.Processing:

Hot forging, Hot rectifying, Hot rolling, Grinding

3.Standard:

ASTM B348,ASTMF67,ASTM F136,ISO5832/2,ISO5832/3,ISO5832/11,

AMS4928,MIL4911

Titanium bar
Grade	Manufacturing technology	delivery state	diameter(mm)	the implementation of standards
TA1 TA2 TA9 TA10	hot forging + lathe (polishing )	R M	6-200	GB/T 2965-98 GB/T 13810-1997 ASTM B348-2000
TC1 TC2 TC3 TC4 TC12	hot forging + lathe (polishing )	R M	6-200	GB/T 2965-98 GB/T 13810-1997 ASTM B348-2000

reference standard 1. GB 228 metal tensile test method 2 GB / T 3620.1 grades of titanium and titanium alloy and chemical composition 2. GB / T 3620.2 chemical composition of titanium and titanium alloy products and also allowed component derivation 3. GB 4698chemical analysis method to titanium sponge, titanium and titanium
1. The chemical composition of titanium and titanium alloy rods shall be meet requirements with GB / T 3620.1, the chemical composition of the allowed deviation should be in accordance with GB / T 3620.2 requirements, by reinspecting of demand-side. 2. Diameter or side lengths and the allowed deviation of hot rods should be in accordance with the requirements of Table 1. 3. The Diameter of the rods after thermal processing and been processed with lathing, (grinding) and cold-rolling, its deviation should be allowed to table II. 4. The non-roundness of the rods after thermal processing (grinding) should be less than the half of its dimension tolerance. 5. For processing the Ti rods of non fixed length ,the length 300 ~ 6000mm, Length at annealing state 300 ~ 2000mm, the length of Constant Length or double length should under the rang of the non- fixed dimension. The allowed deviation of fixed length is + 20 mm; the double length should also be included in the volume of incision rods, per amount of incision is 5mm. the fixed length or double length should be specified in the contract.
Table I
Diameter or side length
8~15	>15~20	>20~35	>35~50	>50~80	>80~125	>125~150	>150~200
Hot forging bars
±1.0	±1.5	±2.0	±2.5	±3.0	±3.5	±5.0	±6.5
Hot squeeze bar
+0.8,-0.7	+0.8,-1.0	±2.0	±2.5	±2.5	----	-----	----
Hot-rolled bar
+0.6,-0.5	+0.7,-0.5	+1.2,-0.5	+1.5,-1.0	+2.0,-1.0	+2.2,-1.2	------	-----